Evans Seal Aqua
Evans Seal Aqua Water Based Polyurethane Floor Seal is quick drying, low odour and dries to a silk sheen,
This floor sealer can be recoated in as little as 2 hours after the first coat of sealer has been applied to the floor.
For use on internal wood and concrete floors.
Water based floor seal based on polyurethane & acrylic for use on internal wood & concrete surfaces.
Provides a protective barrier to the floor, making it easier to maintain.
Produces a durable, slip resistant silk finish.
Non flammable, low odour.
Quick drying, which allows a faster application of additional coats.
Can be used on top of convential solvent- based floor seals.
Coverage per 5lt - approximately 30 - 40 sq. metres for 2 coats.
HOW TO USE
Apply to a clean, dry, wax free untreated floor surface.
Use undiluted. Apply a thin even coat with a seal applicator or clean, soft brush.
Allow floor to dry between 1 - 2 hours. Apply a second coat & allow to dry.
If floor is porous further coats maybe necessary.
Drying times can vary depending on ventilation, temperature & humidity.
Sanding in-between coats is not necessary but a light sand with a medium grade floor pad will help key the surface, especially if a third or fourth coat is applied.
For more detailed information please refer to EVANS GUIDE TO FLOOR CARE
Appearence: Opaque white liquid
pH - undiluted: 8.5
Shelf life: Not less than 3 years
Contains a blend of aliphatic polyurethane dispersion &
All surfactants used in Evans Vanodine products comply
with the current European Regulations concerning
biodegradability and protection of the environment.
EVANS VANODINE INTERNATIONAL PLC operates under
an ISO 9001 Quality Management System Cert. No.
FM 09535 and an ISO 14001 Environmental Management
System Cert. No. EMS 506072 registered by the British